Octane Art
Newbie
- Joined
- Apr 22, 2015
- Messages
- 8
- Reaction score
- 1
I have a 1996 c1500 with a 5.7. I had to replace the exhaust manifold and the EGR tube and in the process noticed that the harness on the drivers side that goes to the a/c temp sender etc. is just laid up on top of the radiator hose. There is a mounting bracket on the harness and an empty peg below the hose on the manifold. There is also a peg on the the throttle body that is empty as well. Does the harness mount to the peg on the manifold and go under the radiator hose or over the top of the hose and mount to the throttle body? I also need the nut size if possible since the nut is gone as well. Any help would be greatly appreciated.
Thanks in advance
Greg
Thanks in advance
Greg