Garage custom, little bit of this and that.

[GrimsterGMC]

That looks really cool, but you just know some fool is going to try and steal your cooler bin when you turn your back since it doesn't look tied down.

 

[Sean Buick 76]

That looks really cool, but you just know some fool is going to try and steal your cooler bin when you turn your back since it doesn't look tied down.

It’s bolted down and I love it! Edmonton Eskimo approved!

 

[Erik the Awful]

Please put a check valve on that vent line!
www.summitracing.com/parts/rus-650613

You must be registered for see images attach

 

[Carmela_obs]

That looks really cool, but you just know some fool is going to try and steal your cooler bin when you turn your back since it doesn't look tied down.

lol yeah I thought about that, but it’s strictly a cruiser so far from few time I wouldn’t be near the truck. And it’s bolted from the inside to the bed, separate from the tank bolt downs.

 

[Carmela_obs]

Please put a check valve on that vent line!
www.summitracing.com/parts/rus-650613

You must be registered for see images attach

Yeah I have one right off the tank before the temporary vent filter. I’ll be switching up to a vent ride run down under bed to frame rail

 

[Carmela_obs]

Made some more progress trimming grill shell for flush billets inserts. Had to add two more bars to fill in where it usually has cutout for the imbedded bowtie. Also had some acrylic trim pieces made to have flush mounted parking lamps with no exposed screw head.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Carmela_obs]

Finished up the hideaway.. New rollover valve and ran breather line under bed to loop with a filter, side back and bottom are vented just to be safe.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Carmela_obs]

Took 2 late model Chevy/GMC exhaust tips, Split and joined to specific length, then cut open bottoms to work as rollpan cutout trim for the custom exhaust. True duals straight back and out the center.

Still finishing up shaping then might seal raw metal or paint bright silver.

screw basic

Build on Instagram: carmela_obs

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Drunkcanuk]

Took 2 late model Chevy/GMC exhaust tips, Split and joined to specific length, then cut open bottoms to work as rollpan cutout trim for the custom exhaust. True duals straight back and out the center.

Still finishing up shaping then might seal raw metal or paint bright silver.

screw basic

Build on Instagram: carmela_obs

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You son of a gun!!!! LOL
I have been toying with the idea of using the HDMI tips for mine through the rollpan as well.
Look forward to seeing how yours turn out.

 

[Carmela_obs]

Had unexpected motor issues with damage to crank. Found an 80s block, went .30 bore, Vortec heads, RV cam, Edelbrock performer intake, Demon carb.

Still have few more aesthetic upgrades and couple more engine bay spots for paint.

Out with old, in with newish

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach