Turbo
Disco Lives
After damaging and repairing my lower rear bedsides so much the metal had fatigued enough to start tearing, I decided something else needed to be done. Old timers will notice I just stole someone else's idea.
Lopped off the damaged area and removed rear bumper..
Sectioned factory mounts (3/16ths") down to 4"..
Making the sides..
45*ing the rear section..
Standoffs for the sides..
Test fitting and sectioning the reciever up and out of the way..
Paint..
Lopped off the damaged area and removed rear bumper..
You must be registered for see images attach
Sectioned factory mounts (3/16ths") down to 4"..
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Making the sides..
You must be registered for see images attach
45*ing the rear section..
You must be registered for see images attach
Standoffs for the sides..
You must be registered for see images attach
Test fitting and sectioning the reciever up and out of the way..
You must be registered for see images attach
Paint..
You must be registered for see images attach
Last edited: