Cant find 5 wire wiring diagram power windows - 1993

[jus10inbrla]

Coming from passenger switch, there is :

(K) Dk brown (window motor)
(G) Dk blue (window motor)
(L)Tan (window switch down)
(J)Lt blue ( window switch up)
(F)Yellow ( 12v)

A(white) unlock coil
B(lt blue) lock coil
C(tan) lock motor unlock
D(orange) 12v
E (gray) lock motor lock

Coming from vehicle wires

window
pink
dk blue
black
tan
blue / white stripe

lock
lt blue
tan
blk / org stripe
orange. / blk stripe
grey


it was wired as follows;

old wire / new wire

window
dk blue / dk blue
brown / brown
tan / tan
blue-white stripe / lt blue
pink / yellow

lock
grey / grey
lt blue / lt blue
blk - org stripe / white
tan / tan
org - blk stripe / orange

im 99.9% positive it is wired corectly, at least since the lock operates properly from the switch, and moving any wire on window portion will not let the driver switch control the window properly.


its got to have something to do with the grounds on driver side that were not hooked up as they didnt have a spot on new switch… but damned if i can find any drawings saying that

 

[jus10inbrla]

all switches work properly on master driver,,, but i will post tomorrow afternoon what each. Was wired to on new switch , maybe that will help decipher something im not seeing

 

[jus10inbrla]

Driver Master Lock switch (new)

A (blk) grnd

B (blk) grnd

C (lt blue) power lock -lock

D (orng) 12v

E (white) power lock - unlock

F (blk) grnd

J (brwn) parking light

L (yelow) 12v



Driver Master Window (new)

A dk blue (window motor)

B lt blue (to psgr side)

C black (12v)

D tan (to psgr side)

E brown (window motor)



Driver old lock

Black

Blaxk

Blk / red stripe

Lt blue

Org / blk strip



Drvr windw

Brown

Blue

Pink

Blk / whit stripe

Blk/ org stripe



Driver (psgr) window

Tan

Pink

Blue/white stripe

Blk / white stripe

Blk/ org stripe



Old / New



Locks

(2) blk grnds / (3) blk grnds

Blk red stripe / white & yelow

*note, yellow is power for window controller*

Lt blue / lt blue

Orange / orng blk stripe



Windows (drvr)

Brown / dk blue

Dk blue / brown

*note, must be wired like this otherwise direction is reversed from switch*

Pink / black

Blk w white stripe (NA)

Blk w org stripe (NA)



Window (driver for psgr)

Tan / lt blue

Blue white stripe/ tan

Pink / blk

Blk w white stripe (NA)

Blk w org stripe (NA)

 

[jus10inbrla]

What am i doing wrong or missing ? Anyone point me in right direction?

 

[jus10inbrla]

@GoToGuy , @someotherguy , tagging yall as yall helped me in past to see something im
Missing

 

[GoToGuy]

I'm out of shop right now. But one thing you may have overlooked. The switches between these two submodels(?)from 93 to a 95 switch system may be internally different. The connections for up or down may look reversed but was normal for that year. Meaning the up is in a different location on diff' year switch.

 

[GoToGuy]

So do you want the GM diagrams from 93 and 95 to compare and match. As in your base truck oe wire converts from candy cane to polka dots on your switch upgrade?

 

[jus10inbrla]

@GoToGuy , these are the drawings i have. And as you said, some colors and spot locations had to be swapped . Idk how much you read, but from master switch i can control the locks, and both windows properly. But on the passenger switch i can only control the locks

 

[jus10inbrla]

Drawings

 

[jus10inbrla]

Next set. They may not be in order on how i had them in my phone.