-
-
GoToGuy replied to the thread ISO door courtesy light pigtail/ wiring.I purchased the OE set, 4 manuals in total when I got my 93. I would check on eBay and the other book , used manual sellers. The OE... -
GoToGuy replied to the thread ISO door courtesy light pigtail/ wiring.If your gonna get real serious and have a lot of electric work. There are more detailed GM service manuals that electric only. Like this.
-
-
GoToGuy replied to the thread 14BSF and 10Bolt Wheel cylinder links/push pins PN.Didn't this get asked and answered within the previous two weeks? The part number will cross over, there not unique.
-
-
GoToGuy replied to the thread 7.4 swap c1500 tight on the passenger side.If you had to mod that much, are you sure those are correct? At one time I could only install headers from the bottom up. In a 427...
-
GoToGuy replied to the thread TBI to HEI.What year, make, model ? What other mods? Normally what your doing is a step backwards. There all High Energy Ignition now.
-
GoToGuy replied to the thread ISO door courtesy light pigtail/ wiring.Aptiv is the company that bought Delphi electric division. A Lot of the connectors use GM , or ACdelco, Delphi together, as a search...
-
GoToGuy replied to the thread '96 dash upgrade in '94 blazer but the hvac control has me stuck.Are you using the 94 and 96 OE service manuals that have the OE wiring diagrams? It's a digital display. Not digital control. I would...
-
GoToGuy replied to the thread Aftermarket Gas Gauge signal connections; purple, orange/black wires?.Guess work, plus fuel , can equal a very bad day.
-
GoToGuy replied to the thread 1998 GMC c1500 sierra missing front and rear sway bar.Just for the wonder if it. I have a parts diagram for this. It's a rear bar for a 1 ton series. I think that would do. I'm gonna order...
-
-
GoToGuy replied to the thread Clutch not moving at all.That's not a repair of the existing problem. It's called a temporary fix. You know what's good for you. As I , we can't see, and...
-
Starter makes "siren" noise when the key is turned to "Crank", but the engine does not turn? Yup, you got a defective starter. This is...
-
GoToGuy reacted to someotherguy's post in the thread Interesting post on parts and machine work quality with
Angry.
Relevant to all areas of the motor vehicle hobby, IMO. From a FB page of a company called AZ AMC Restorations: "Due to the dwindling... -
GoToGuy replied to the thread Oil cooler adapter mount bolts seal.It isn't mandatory to seal tight as it's in the filter boss oil flow area. Whatever feels good is correct. :waytogo:
-
GoToGuy replied to the thread Oil cooler adapter mount bolts seal.It's a common copper washer, similar to ones used on injectors or brake fittings. Just get one at parts place that's same size / dimensions.
-
GoToGuy replied to the thread Oil cooler adapter mount bolts seal.Two or four wheel drive?
-
-
Loading…
-
Loading…
