Cant find 5 wire wiring diagram power windows - 1993

[jus10inbrla]

All im finding is 3 wire window switch drawings. Does anyone have or point me to a 5 wire wiring diagram for the 93 power windows plz? Thx i. Advance

In process of swapping to 95/98 style doors

 

[89obsSB]

All im finding is 3 wire window switch drawings. Does anyone have or point me to a 5 wire wiring diagram for the 93 power windows plz? Thx i. Advance

In process of swapping to 95/98 style doors

I think this is what you need.

You must be registered for see images attach

 

[jus10inbrla]

U got it! Thx . I got the locks working, somewhat got windows going.. found the wires via a meter. But that will help a ton.

 

[jus10inbrla]

Alrite. Locks working, windows working! So when swapping , i didn’t even need to hook up post B or E from the 93 harness. Just capped them off. Only needed the hot, and two wires to each window. They did have to be wired “backwards “ tho , as down went up and up,went down.. reversed post C & D and it worked just fine. Just looks odd if Someone ever looks at wiring lol, blue to tan and tan to brown on psgr side and brwn to dk blue / dk blue to brwn on other side,!

 

[jus10inbrla]

i will need to get a new master switch tho, the lock button is failing off. And illumi lights quit working. Anyone used the ebay specials for like 20 bucks?

 

[jus10inbrla]

@89obsSB ; good news bad news. I got all the wiring swapped over like i said on driver side. However, when i moved to passenger, i got the locks going. But windows is a whole nother animal. Do you have a drawing for passenger window switch (95) other than this ?

 

[89obsSB]

@89obsSB ; good news bad news. I got all the wiring swapped over like i said on driver side. However, when i moved to passenger, i got the locks going. But windows is a whole nother animal. Do you have a drawing for passenger window switch (95) other than this ?

No that’s all that I could pull up. I could look on Monday on GM service information at work.

 

[jus10inbrla]

Ok thx. So i will just run it by whats going on. When i wire it up, i will hsve to get exact circuit numbers but the window starts auto rolling up, or down.. depending on how i swap the wires.

 

[jus10inbrla]

So i found out that i had the tan from window switch tied in with tan from lock. now that is fixed; looks like i have a bad switch. Wire for wire all readings with meter go back to bad switch. master is good but imaa go head & buy both new.

 

[jus10inbrla]

Ordered new switches. Dormans For both. Unfortunately the passenger is still unable to roll down window. Master from driver controls passenger window flawlessly. Master & passenger lock buttons work properly .


so im guessing maybe post B & E ( grounds) have to be hooked up somewhere. That is only thing i can think of… any suggestions?