DirtMcGirt
Newbie
I’m in need of the backspacing specs of the factory 16” steel wheels to get the right spacers for my 4.5” front lift spindles.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ran into the same thing. Freaked me out at first when loosing brakes after a full turnI don't have the specs but I assume the warning is because the stock wheels will hit the banjo bolt and compress the brake caliper when making full lock turns. A remedy to this is cutting the steering stop off the lower control arms. I ran stock wheels with 245/75/16s on my c3500 with no problems after removing the steering stops.