Good thing I put the red bed on last week. Found a parts truck I can get my money back on and it has a white bed. 454/4L80/4WD. Plus it has what I need to hydroboost my 1500. And the seat belt receptacles I didn't grab when I swapped seats on it. Plus the carpet shows me where to cut to install the center console. I think I'll pick at it for a bit before scrapping the rest.
You must be registered for see images attach
This should have been easy, but my ghetto rigging abilities were really put to the test today. See that sweet 9k winch?
You must be registered for see images attach
I forgot the ****** remote for it. So I ripped a wire off the parts truck and started jumpering holes until I could drive the winch both directions. Then the battery was a POS, didn't even get the front wheels on the deck. So I stole the battery out of the dually as those were the only tools I brought. Then because it was a side post, the wife had to hold the wires to the battery while I dicked with the little jumper. If that were all there was to it, still wouldn't have been a big deal, but because the winch was attached to the truck I couldn't get the trailer straight and my truck in line with it all. I had to compromise and that meant the truck went on at an angle. With a broken tie rod, so I installed a limiter strap.
You must be registered for see images attach
I really hope this **** gets easier, because now that I have this capability I'd like to use it more to make some extra dough.