Z71Hobbs
I'm Awesome
Not necessarily standard. Just an option.they must have become std equipment on the later models. my 97 and both 98s had a driver side tray and they were all 5.7s
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Not necessarily standard. Just an option.they must have become std equipment on the later models. my 97 and both 98s had a driver side tray and they were all 5.7s
No problem!Got it. Thank you, sir.
You must be registered for see images attach
I’m in contact with a couple different suppliers to make sure I’m getting at least 14g if not 12g wire to make sure it stays consistent. No sense in stepping down to what’s readily available right at the harness, defeats the purpose! One is local so here’s hoping they can. If not I’ve sourced the bare harnesses and will just build them completely. I’ll give you a shout when I figure it out so your work isn’t wasted!