stroker52
I'm Awesome
been all over the web looking at pix of dehumping lowers.. pie cutting the frame.. using 3/4 or 1 ton uppers i need some feed back on what to do to get the front to lay out on 22's with a 29 inch tire.. im not putting my shock behind the a-arms im going to run it though the upper a-arm down to the lower with a custom braket to hold the top..
also just something i seen at a show.. i seen where someone rasied the upper a-arm mounts about 2 inches i guess to help with camber and im reallly thinking about doing this to help with a-arm angles.. give me some input on this..
if you have some pix please post!!!
also just something i seen at a show.. i seen where someone rasied the upper a-arm mounts about 2 inches i guess to help with camber and im reallly thinking about doing this to help with a-arm angles.. give me some input on this..
if you have some pix please post!!!