98 chevy 1500 engine issue

[Dougm72]

ok i got the oil cooler lines off but the trans had two bolts a big one and a small one after the big one when i tried to turn the big one it started to twist the line so i stoped any ideas?

 

[FastOrange]

do you mean nuts? im confused, are you talking about the lines?

 

[Dougm72]

man im sorry i mean nuts. and the lines on the left if your looking down at the radiator there is one by the cap and one by the lower radiator hose.

when i tried looseing the top line by useing the wrench on the bigger nut it started to twist and bend the line

 

[FastOrange]

man im sorry i mean nuts. and the lines on the left if your looking down at the radiator there is one by the cap and one by the lower radiator hose.

they should be the same size, 1/2" i think...

 

[Dougm72]

ok i got it off my buddy came over and did it lol. i guess i was patient enough for it. now for the core support!

 

[Dougm72]

i just ordered my engine stand its 59.99 for 1000 pounds i got the bolt kit for 5.99 and a engine light chain (sling) for 14.99

take a look at this i found it looking around ebay for some stuff
http://cgi.ebay.com/ebaymotors/Chev...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/5-7-...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[Dougm72]

any tip and thought on self honing cylinders?

 

[Sepiroth]

For what?

 

[ndians68]

my tip for self honing is dont do it personally i think something like that needs to be done professonally

 

[FastOrange]

any tip and thought on self honing cylinders?

why? you have rod knock.