96 k1500 project

[96chevy33]

You must be registered for see images attach

What i started with, i bought it when i was a junior in highschool and here are a few things ive done to it since then...
drove it stock for about 6 months, blew the motor
Replaced the motor, lower ball joints water pump, fuel pump
put a 3in. body lift on it with 305/70/r16 nitto terra grapplers
Driver side cab corner was rusting out so cut out the old one and welded in a new
The bed had some pretty nasty dents in it and the paint was peeling off, got rid of all the dents and repainted it
Got my rockers line-xed along with all the wheel wells

 

[96chevy33]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

a few pictures of the body lift

 

[96chevy33]

You must be registered for see images attach

 

[96chevy33]

You must be registered for see images attach

debadged and painted took the chrome chevrolet off the tailgate

 

[96chevy33]

You must be registered for see images attach

getting all the adhesive off from the trim with one of those eraser wheels

You must be registered for see images attach

line-xed rockers and the above the wheel wells

 

[96chevy33]

just put magnaflow exhaust on it dual in dual out with rounded tips coming out at a 45 and the tips cut flush with the truck.

You must be registered for see images attach

planning on adding this front bumper soon, just have to weld up some brackets so it will fit