6.5 TD 4x4 oil filter adapter

[Frank Enstein]

Anyone know if it will go on my 1996+ block 350 ish engine? If so, does anyone have one for sale cheap? I had one and like a dummy pitched it.

 

[smdk2500]

I don't think they will. They mount with one big bolt. If i remember right the small blocks have 2 small bolts.

 

[Frank Enstein]

Thanks!

 

[smdk2500]

No problem. Just out of curiosity why where you wanting to use a 6.5 adaptor?

 

[454cid]

I'm curious too. I actually never thought of the 6.5 using an angle adapter.

I have an extra one for the 454, but I don't have the bolts for it.

 

[smdk2500]

I'm curious too. I actually never thought of the 6.5 using an angle adapter.

I have an extra one for the 454, but I don't have the bolts for it.

I know the 4wd at least had the angled adapter. Not sure about 2wd. I would guess they are the same as the gasser trucks.

 

[GoToGuy]

The angled smaller filter just to clear 4x4 extras. The 2 wheel did not require clearance.

 

[Frank Enstein]

I want to run this https://www.summitracing.com/parts/wix-51794 without running any hoses to clear my front driveshaft.

You must be registered for see images attach

 

[Frank Enstein]

I just unscrewed the adapter and screwed on the filter on my 2wd Sub diesel cuz I bought a 4wd 6.5 for it and I thought I would never need it.

 

[smdk2500]

Can you use one off a 454? I don't know how much different they are. I don't know much about the big blocks. If i remember right there hoses are set up like the 6.5 where they come out of the block not the adaptor.