Anthony Hawes
Newbie
yea absolutely find one ebay for $20 did mine on the ground with 4x4.does this vette servo work for push button 4x4 4l60e trans? and where can i locate one
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
yea absolutely find one ebay for $20 did mine on the ground with 4x4.does this vette servo work for push button 4x4 4l60e trans? and where can i locate one
Both my 94 rcsb 4x4's have the corvette servos factory original equippedHey guys, check the measurement on the servo. Some 4L60-E's come with the corvette servo from the factory. Sonnax lists the sizes.
http://www.sonnax.com/articles/132-...itional-Second-Gear-Servo-Size-for-the-4L60-E
The ATSG service manual lists the servo's by size and trans codes they are installed in. Check your servo measurement before laying out money for the corvette one, you may already have it.
I just did mine, and found I needed a third hand to hold the servo in when installing the last snap ring. Tossed a cargo strap around the trans, being careluf to avoid the electrical harness and speedo cable, then stuck a deep well socket in the cup on the servo housing. Snuggled it down and the snap ring went in fairly easily
I used as prybar against the tunnel.