14 bolt swap question

[atyates]

I currently have a 10 bolt and a one piece aluminum driveshaft. can someone give me the part numbers on the u joint I need.

2nd, isn't there something different about the u bolts between the two axles? if so, what?

thanks

 

[1988GMC]

Can't help ya with the part numbers but as far as the Ubolts the ten bolt uses a standard bottom up U bolt. The 14 bolt if its from a one ton it will most likely have top down Ubolts but it can be easily swapped over offroad design has the kit here is the link http://www.offroaddesign.com/catalog/uboltreversal.htm they also have pictures explaining the difference better.

 

[atyates]

Can't help ya with the part numbers but as far as the Ubolts the ten bolt uses a standard bottom up U bolt. The 14 bolt if its from a one ton it will most likely have top down Ubolts but it can be easily swapped over offroad design has the kit here is the link http://www.offroaddesign.com/catalog/uboltreversal.htm they also have pictures explaining the difference better.

thanks man. now if I can just get someone to chime in with the part number for the u joint I need

 

[thz71]

http://www.gmt400.com/forum/showthread.php?t=16839

 

[atyates]

http://www.gmt400.com/forum/showthread.php?t=16839

Thank you. I searched forever searching the words 14 bolt and never found anything

 

[thz71]

No problem hope it helps