Search results

  1. Stumpy

    Cheap plasma cutter

    Anybody have experience with cheap plasma cutters? I've always wanted one, but didn't want to spend the money. Now I'm seeing some in the $200-300 range, that I might could justify buying. JEGS plasma Cutter Mainly looking at that one. It won't get used a ton, I don't think, but would...
  2. Stumpy

    '50 Chevy 3100

    Wound up getting a '50 after all, and picked it up today. Had to drive 5 hours to Tennessee to get it. What a day. Needs some love, but it has the 2 main things that I had to have. 3 window, and sitting on a S10 frame. Also has a 350, with 350 turbo transmission. Not sure what the rear gear...
  3. Stumpy

    NV4500

    Just pulled from my '96 C3500, and was working as it should. Includes the trans, bell housing, master, and pedal. I'll throw in the flywheel, and clutch too, if you want them. No wiring, don't want to deal with the hassle of trying to dig it all out of my truck. $700 OBO
  4. Stumpy

    NV4500 to 4L80E swap ?

    In the midst of this swap, and going to have a driveshaft issue to deal with. Top is the NV4500 driveshaft, RCLB 3500. Bottom is ECLB 2500 4L80E driveshaft. I need a shorter front driveshaft, and looks like the 2500 is the length I need, but it's going to be really close. Question is, how...
  5. Stumpy

    NV4500 to 4L80E swap

    My setup is a 2wd '96 3500. I know I need to get a flex plate, but the trans shop that's rebuilding the 4L80E, had a book showing that I may be able to use the torque convertor, from the 454 setup, with my 350. The book showed 2 for the 350, low stall, and high stall, and just one for the 454...
  6. Stumpy

    *SOLD* 2003 4L60E

    Thought there might be a chance, somebody on here might want this. Came out of a 2wd 2003 Suburban, with 101,000 miles on it. Was working when removed. I have no plans to use it, and is just taking up space. $200 obo.
  7. Stumpy

    '97 ECLB 2500 part out

    I bought this truck for parts, and figured I'd see if some of the stuff I don't need, can find a new home. Everything is OBO. Power bucket seats, and console, tan in color. seats $100 console $50, may ship, but seems like it would be pricey. Rear seat, $50 The seats are in decent...
  8. Stumpy

    forced email change

    Got on here last night, and had a notice, saying there was an issue with my email, and that I needed to change it. I've had the same email for 20+ years, there's nothing wrong with it, but had to switch to a different email, to be able to post here again. Now I'm using an email that barely gets...
  9. Stumpy

    *FREE* 2014 Silverado seats

    I bought these to use for parts, or swap the upholstery on. I wound up only needing to use the motors and wiring harness from the driver's seat. The passenger seat is a normal manual seat, as I bought it, and seems to work as it should The driver seat is where the issues come into play...
  10. Stumpy

    Ignition lock cylinder

    My ignition key switch is coming apart, along with my key being wore out, it's getting tough to start my truck. I'd like to get a new OEM one, and wondering if anybody has ordered one from GM parts direct. It doesn't say if it comes with keys or not, and I'd like to get it all in one shot. Or...
  11. Stumpy

    '96 WT grille and lights

    Converting my truck to the Silverado front, so thought I'd see if anybody wants this stuff. Grille looks rough, but no cracks or broken tabs... These are some kind of aftermarket halogen headlights, that I've had forever, and used to be on a S10, but worked without issue on my truck...
  12. Stumpy

    trailer rehab

    I've had this car trailer for about 25 years or so, and it was starting to look like it. I bought it used, but was in good shape, over the years I made the mistake of letting family borrow it a couple times, and both times it came back damaged, in one way or another. It use to have a nice set of...
  13. Stumpy

    ID this plug?

    Trying to get my AC working, compressor won't run at all, I found this wire laying on top of the engine, and can't find where it would plug in. It seems to be related to the HVAC, and one wire gets hot, when you turn the blower fan on, other that, I'm lost. I went all over the schematics in my...
  14. Stumpy

    1500 bolt on 4 link fit a 3500?

    I've had a few trucks on air ride, and they have all been bolt on, since my welding capabilities are limited. Is there any chance I could use a half ton bolt on 4 link on my 96 rclb dually? Bag mounts I can take care of, just need to get the suspension switched out. I thought about going with...
  15. Stumpy

    96 C3500 RCLB aka Stumpy

    Finally snapped a few pics of this truck I picked up a couple weeks ago. I had been looking for a RCLB for a long time, and not one that they wanted 10+ grand for. Lucked up and found this one local, for a decent price. This thing has been used and abused for some time, as the interior...
  16. Stumpy

    New from SC

    Just picked up a 96 rclb c3500, with a 5.7, and 5spd manual. Been looking for a regular can for a long time, and found this one at a pretty good deal. I use to have a lowered crew cab as a daily, but that go old pretty quick. The 96 will be just for fun, and to tinker with. Planning to bag it...

Latest posts

Staff online

Members online

... and 18 more.
Total: 1,689 (members: 68, guests: 1,621)

Forum statistics

Threads
64,362
Messages
1,392,222
Members
51,489
Latest member
Jim Burray

Share this page

Top