Lower front balance shortening

Mingwro · May 6, 2022

I love the look of my stock lower front valance on my lowered 1990 GMC Sierra SLE….however it scrapes sometimes when driving and would like to shorten 1”…does anyone sell a shortened one or is their a video on how to cut it down?

TonyM · May 6, 2022

You can just run a line using masking tape along the bottom to use as a guide and cut it with an airsaw or grinder with a thin cut off wheel if you have either. The cut off wheel could cause melting if you go too fast but with good hand control you can get a nice cut

Tommy1234 · May 7, 2022

I would go with either the saw cut off wheel route

drewcrew · May 7, 2022

TonyM said:
You can just run a line using masking tape along the bottom to use as a guide and cut it with an airsaw or grinder with a thin cut off wheel if you have either. The cut off wheel could cause melting if you go too fast but with good hand control you can get a nice cut

wouldn't that take some of the rigidity out of it ? It seems like it would distort pretty easy, especially on hot days.

Lower front balance shortening

Mingwro

Newbie

TonyM

I'm Awesome

Tommy1234

I'm Awesome

drewcrew

I'm Awesome

Similar threads

Latest posts

Members online

Forum statistics

Share this page