Replace motor mounts???

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

homesick

OBS Enthusiast
Joined
Oct 7, 2018
Messages
86
Reaction score
49
Location
OK
What're your symptoms?

And I agree with the guys- it's not a complicated job. Just take your time and think about what you're doing.

joe
 

fancyTBI

Some of my trucks run and drive
Supporting Member
Joined
Oct 7, 2018
Messages
2,536
Reaction score
6,860
Location
Northern IL
Ordered mine from Summit and they were about the same as what were in it. Very pleased with the fit of them.
 

LS3M6

Newbie
Joined
Jun 22, 2023
Messages
3
Reaction score
1
Location
New Zealand
I'm about to replace mine with the engine still in, I've been procrastinating about doing them for nearly a year. When I got the new mounts I realized they are not as good as the OEM ones, so I filled them up with black polyurethane from top to bottom and side to side of the rubber inside the clam shells. Once the polyurethane is set, they are a lot more heavy-duty and sturdy and hopefully will last a lot longer with the extra strengthening.
 

FA31

OBS Enthusiast
Joined
Jan 22, 2021
Messages
71
Reaction score
49
Location
Birmingham, AL
I'm about to replace mine with the engine still in, I've been procrastinating about doing them for nearly a year. When I got the new mounts I realized they are not as good as the OEM ones, so I filled them up with black polyurethane from top to bottom and side to side of the rubber inside the clam shells. Once the polyurethane is set, they are a lot more heavy-duty and sturdy and hopefully will last a lot longer with the extra strengthening.
Did you ever replace them, or are you still procrastinating?
 

fancyTBI

Some of my trucks run and drive
Supporting Member
Joined
Oct 7, 2018
Messages
2,536
Reaction score
6,860
Location
Northern IL
Did you replace them in a 2WD or 4WD? Can you please link what you bought and were happy with?
I did them in a 2wd. It was 5-6 years ago and they’ve held up fine. I will be removing the engine in the spring and I’ll give them a visual inspection once they’re out.

I don’t have that summit account anymore (forgot login, couldn’t recover it) so I can’t give a part number on it. Maybe there is one stamped into the shell… doubtful.
WHAT PART NUMBER? Link?

I'd be thrilled to find acceptable mounts for mine. Everything I've seen either doesn't fit, or is total 2637 thin-steel garbage.
I’m a little late - I wish I would’ve seen this years ago and I might have a part number. Sorry, I goofed that up.
 

FA31

OBS Enthusiast
Joined
Jan 22, 2021
Messages
71
Reaction score
49
Location
Birmingham, AL
I did them in a 2wd. It was 5-6 years ago and they’ve held up fine. I will be removing the engine in the spring and I’ll give them a visual inspection once they’re out.

I don’t have that summit account anymore (forgot login, couldn’t recover it) so I can’t give a part number on it. Maybe there is one stamped into the shell… doubtful.

I’m a little late - I wish I would’ve seen this years ago and I might have a part number. Sorry, I goofed that up.
From my understanding the 2WD fit well, it’s the 4WD that give problems, but I don’t have personal experience with them. However, I need to figure it out before I need to replace mine.
 
Top