I am probably opting to swap for new foam cores and bottom replacement covers on the 95-98 c1500 bucket seats that I went back to after swapping away from the 88-94 seats I recently (((SOLD))
Has Anyone swapped in the past few years for new replacement bottom foam cores and or also the fabric pre- upholstered bottom covers ?
So it’s know that the oem GM fabric is long discontinued but these are pre made by vendors online with a close matching material.
Any feed back on the quality of the eBay or an online vendor that has aftermarket bucket seat core replacements for 95-98 seats and if any difference in quality would be good to know from one supplier to the next ?
Obvious the Oem pattern/color is now gone for good but they claim to make good close fabric matches for the seat bottoms.
Particularly For the ((gray)) is the color patterns and tone close to factory? Are the new aftermarket foam core bottoms firmer then the GM factories are even at there most worn stage ? Particularly around the bolstered / outer edge of the foam ?Does everything go back in good with these replacements. Few videos claim 20-30 min install.
Either way I’m gonna do it but I figured feedback on what to expect was good to have. I do do not necessarily need to replace the bottom cores , I Only would if they are Better firmer then comparable to a worn factory core.
The bottom fabric upholstery I absolutely need ‘
This is what’s offered by the vendor I was talking with my main concern is knowing about the core quality and the color match. Photos don’t really do justice , but hands on experience might tell me more
Has Anyone swapped in the past few years for new replacement bottom foam cores and or also the fabric pre- upholstered bottom covers ?
So it’s know that the oem GM fabric is long discontinued but these are pre made by vendors online with a close matching material.
Any feed back on the quality of the eBay or an online vendor that has aftermarket bucket seat core replacements for 95-98 seats and if any difference in quality would be good to know from one supplier to the next ?
Obvious the Oem pattern/color is now gone for good but they claim to make good close fabric matches for the seat bottoms.
Particularly For the ((gray)) is the color patterns and tone close to factory? Are the new aftermarket foam core bottoms firmer then the GM factories are even at there most worn stage ? Particularly around the bolstered / outer edge of the foam ?Does everything go back in good with these replacements. Few videos claim 20-30 min install.
Either way I’m gonna do it but I figured feedback on what to expect was good to have. I do do not necessarily need to replace the bottom cores , I Only would if they are Better firmer then comparable to a worn factory core.
The bottom fabric upholstery I absolutely need ‘
This is what’s offered by the vendor I was talking with my main concern is knowing about the core quality and the color match. Photos don’t really do justice , but hands on experience might tell me more
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Last edited: