Replacing GM alarm w/Viper Help.

[FATBAK]

I'm replacing the GM alarm system in my 97 Silverado with a Viper 3100V system. Does anyone have a wire to wire diagraham for this or can point me in the right direction? Im confused about the door locks wiring. Thanks so much for any help.

You must be registered for see images attach

You must be registered for see images attach

 

[618 Syndicate]

@Wh4t3v3rs

 

[FATBAK]

Sorry, edited my post to include that I already have the Viper 3100V system. Confused about how the Viper wiring crosses over to the multiple wires from the GM system.

 

[618 Syndicate]

The guy I tagged is our resident expert in such matters. Hell get you sorted.

 

[PlayingWithTBI]

@Wh4t3v3rs drew this diagram on another thread a while back. I used it on my 88 with no issues. Had to use 2 cube relays with it. This uses the same Lt Blu wires your schematic shows. HTH

You must be registered for see images attach

 

[FATBAK]

@Wh4t3v3rs drew this diagram on another thread a while back. I used it on my 88 with no issues. Had to use 2 cube relays with it. This uses the same Lt Blu wires your schematic shows. HTH

You must be registered for see images attach

Thanks

 

[FATBAK]

Is there an aftermarket unit that has internal circuitry so you don't have to do the 5 wire relays on my truck?

 

[Caman96]

I believe those relays are not needed if you have an xtra-cab. But, best bet is wait for @Wh4t3v3rs.

 

[Caman96]

Is there an aftermarket unit that has internal circuitry so you don't have to do the 5 wire relays on my truck?

IDK, but that is a great remote start you’ve got and speaking from experience after recently installing one, it’s not as complicated as it seems.

 

[FATBAK]

The guy I tagged is our resident expert in such matters. Hell get you sorted.

Thanks