DonYukon
Dont stop until it sounds expensive
I unplugged mine about 10 years ago. I havent had issues. even the light went out eventually lol (burnt out)
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I guess I'm overdue to connect the Solus Pro to the '88, then.
Yeah, I did some research, and I'm thinking you're right that it does three things. But brake fluid LEVEL may not be one of them. Something is going to warn the driver when the front and rear pressure isn't equal.
Do the rear brakes get warm when used hard?
Have you tested resistance of the solenoid coils in the ABS unit?
I'd hope that using the scan tool ABS auto-bleed to chatter the valves might clear or unstick them. Worth a try--or ten.
2. Do your calipers work properly? I've seen them get really crusty; they "work" but the piston doesn't move as freely as it should. Thus the front brakes don't apply like they should, leading to "weak" braking. Secondary issue--the earlier "regular cab" trucks got JN3 brakes, which have the smallest pistons in the calipers. I don't remember when they got rid of the JN/JB3 option. JN/JB5 calipers are a substantial upgrade.
My '88 started out as a JN3 horse-shiit-brakes regular cab.
First, I changed rear axle to get away from the horrible 254mm leading/trailing shoe rear brakes. 11.x Duo-Servo rear brakes came with the 9.5" axle.
Later--and almost by accident--I slapped on the upgraded "JB5" calipers and rotors; the goal was to replace a damaged steering knuckle. By pure chance, my donor vehicle happened to have the more-powerful front brakes included with the Extended-cab trucks. I didn't know 'til I got home from the Treasure Yard. Had to go back and get the more-powerful booster and bigger-diameter master cylinder to match my more-powerful front calipers and wider rotors.
So from the weakest "power" brakes offered on a GMT400, (JN3) I now have the equivalent of JB6. Still with the original RWAL ABS, still with the original combination valve.
When I first bought the truck--late 1997--among the first things I did was to replace the ABS module. It was expensive even then. No promises on it still being available. With luck, you can get one from the Treasure Yard, and hope it works.
What is the history with those JN3 brakes anyways? Were they carryovers from the square body generation?
My Dad's 88 RCSB I'm sure has those. I drove the truck for a short while many years ago out of high school. I do remember the brakes were definitely not the best on the stopping distance department, LOL.
We had a 72 C20 Custom with a Buick 402 prior to the 88 GMT 400. I never drove that truck, but I never heard anyone complain about the brakes. Only complaint was it wasn't easy on gas. It used to belong to my oldest brother, then went to Dad and he sold it for some drywall work...
Do you have JN3 brakes now?Will the upgraded calipers bolt on to my stock steering knuckle?
When they work properly, there's no problem with the ABS units. But most of the time, they're not working properly. Either they're outright defective; or (more often) they haven't been bled properly.I had an 88 with the atrocious brakes that Schurkey speaks of, but what was even worse was the RWAL's performance one day on a muddy ass road. It was so bad I decided to delete it altogether. All I did was use a single adapter to move the rear brake line from the ABS unit to the prop valve itself. My 98's 3 channel setup was also fvcking garbage, so I retrofitted junkyard lines from an 89 to mimic what I'd done to my 88. There is such a thing as good ABS, it just never came on these trucks.
No. They were just cheap, bottom-feeder, small, cost-cut pieces intended for the smallest, lightest (most popular) C/K GMT400s.What is the history with those JN3 brakes anyways? Were they carryovers from the square body generation?
Chevy had a 402. Buick had a 401 (Nailhead) which was labeled a 400 when installed in the Skylark. Last year of production for the Nailhead was '66. Starting in '67, Buick had a modern wedge-head 400, along with the 430. Both the wedge 400 and 430 were dropped at the end of the '69 model year in favor of the Buick 455.We had a 72 C20 Custom with a Buick 402 prior to the 88 GMT 400.