I have an extremely narrow 1 car garage. I can fit my ECLB C2500 in but it is nosed up against my tool box at the front of the garage almost. I am tired of working off my box and need to maximize storage. I have 18'x2'x6'10" to work with. This will allow my tool box to fit under the bench, have a larger workspace, and still have storage for power tools, blow formed cases, detailing supplies, automotive fluids, specialty tools, etc. all while still being able to get in and out of my truck.
I attempted to make a design in Sketch-Up Free and this is what I came up with. I have near-zero carpentry experience. Does anyone have any suggestions or input? I want this thing to be sturdy as hell. Planning on tying into existing studs so it is secure against the wall. It is mainly built out of 2x4s, 4x4s, a couple of 1x2s, 1/2" - 3/4" plywood sheets and that is about it. Did I overbuild? Did I design this poorly? Please show off your small garage storage if you want to! Below are photos of the model for reference. The person is 6'.
I attempted to make a design in Sketch-Up Free and this is what I came up with. I have near-zero carpentry experience. Does anyone have any suggestions or input? I want this thing to be sturdy as hell. Planning on tying into existing studs so it is secure against the wall. It is mainly built out of 2x4s, 4x4s, a couple of 1x2s, 1/2" - 3/4" plywood sheets and that is about it. Did I overbuild? Did I design this poorly? Please show off your small garage storage if you want to! Below are photos of the model for reference. The person is 6'.
You must be registered for see images attach
You must be registered for see images attach