L31MaxExpress
I'm Awesome
CCA-08-464-8. That's the part number @ Summit Racing.
.550 intake .546 exhaust
Glass smooth idle with gobs of torque.
Call Summit Tech ask for Tom
I personally would not run any XFI lobe on a cast core! I had a XFI grind lose a few lobes and destroy the matching roller lifters. Also that cam even with 1.5 rockers should have the press in studs removed and have the heads machined and tapped for screw in studs. The required valve springs will end up pulling the OEM studs out of the heads. That cam is also very similar to a F/Y-car LT1 cam just a little more lift and slightly tighter LSA.