Drunkcanuk
I'm Awesome
Having trouble with the driver side shock extension installation. They are Belltech's going on a 91 RCSB. The part number matches the packing list in the instructions. Passenger side had to have the holes hogged out a little bit to get the bolt through, but not bad.
The driver side is another story altogether. The bolt holes are almost off the entire hole. I marked where they should be needed in yellow.
Any thoughts on this would be appreciated.
1stbpic is passenger side. Note the curve on the extension follows the stock mount and on the driver side not so much. Both have the same part number. So frustrated.
The driver side is another story altogether. The bolt holes are almost off the entire hole. I marked where they should be needed in yellow.
Any thoughts on this would be appreciated.
1stbpic is passenger side. Note the curve on the extension follows the stock mount and on the driver side not so much. Both have the same part number. So frustrated.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach