Cadillac Bob
Slammin original 4x4 Cadillac doors!
Here’s my “rear end” red lights!!! Lmfao!
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I put RED license plate bulbs so whole back end is red lit! It’s a nice look plus little lower light for cops to have a bit harder time reading plate numbers! Lol
Been looking to do this ever since I put some bright white LED backup bulbs. Thanks for the link!Since this thread got bumped I might as well contribute to the discussion. A couple years ago I switched both of my '97s to LED license plate lights, this style specifically, in white.
www.amazon.com/PA-CANBUS-Silica-Driving-License/dp/B07DW3JB3H
They're still doing great. They fit just fine in the original sockets/housings and should be relatively waterproof even if the housings leak a little.
You can replace the whole assembly with an led setup that will light up your whole tailgate. They snap right in and look like oem housing. They are ridiculously bright. I put some on one of my trucks. I’ve had them in mine for 3 plus years now with no issues.so i access it from behind th bumper? or does the housing pop off?
on another note these bulbs...
You must be registered for see images attach
with the printed circuit boards and 12V positive and negative on both sides of the board...... the only place I have found that these dont work is in the cargo lights and maybe the 3rd brake lights