The foam im looking for in my case needed would be for the basic one and only style buckets offered in the 95-98 Silverado seats i believe they were the exact style buckets offered in 95-98 Tahoe also and 95-(99) suburbans.There's more than a few vendors of the foam cushions for the buckets, now. Can't say whether they're all being manufactured by the Co. or not, but I wouldn't buy the Dorman versions. Cause...'Dorman'.
I've found that the white foam is of a better quality than the yellow-ish versions.
I'd highly recommend the new foam when replacing the covers. (see pic.)
There's 2 styles. The Silverado type with the 2 side-to-side pleats in the inserts & the Escalade style with a single pleat running down the center of the insert.
Each type has it's own specific foam.
As far as the fabrics used in the repop covers? No experience so I can't vouch as to the fit & finish nor the quality or the closeness of the fabric match to OEM.
As an example. New cover/old foam.
You must be registered for see images attach
I can’t say if gmc offered the same fabric and style in the Yukon or sierra
Below is the seats I have from a donor 98’ ext cab Silverado (Gray)
Below shown is the seat covers and foam I’m inquiring about replacing they came from a 98’ Silverado .
I could have the entire 3rows redone in vinyl at an upholstery shop I’ve dealt with , but it’s unnecessary at that price point when the 2nd and 3rd row seats are in A1 clean shape , and fine for me as a daily driver .
So I am just getting insight on what’s out there as far as the quality of these pre~fab aftermarket 95-98 bottom covers and cores
Front bucket driver (worn)
Pass side has (burn) and (seam rip)
You must be registered for see images attach
You must be registered for see images attach
2nd row seating great condition
You must be registered for see images attach
You must be registered for see images attach