Pics of your MSD box install

[Mrbeefy334]

After searching the forum for msd and returning zero results, I though shurely some one has a MSD on their rig.
I got a 99 350, haviong trouble deciding where to mount my 6A.
ANy sugestions or pics would be great.

 

[daddy_dandy]

You must be registered for see images attach

 

[Low 89]

Is there much benefit to adding an MSD ignition?

 

[daddy_dandy]

Not necessarily. The stock ignition system can handle about 400hp. At that point you're maxing out fueling capabilities as well. Personally, I don't see much reason to add one on a reasonably stock setup.

 

[Mrbeefy334]

I personaly notice better idel and thottle responce. Not to mention it provides full power even at high RPM, probably the best benefit.
BTW dandy nice install thank you.

 

[Mrbeefy334]

You must be registered for see images attach

 

[Mrbeefy334]

Check it out I got my 6A installed. Not exactly how dandy did but there is more than one way to skin a cat. Couple of zip ties to clean up the wires, and done
.

 

[///RAGMC]

You must be registered for see images attach

 

[Mrbeefy334]

So rag did you delete your coolant reservior or is it located out of frame? very claen engine too.

 

[low4x4]

in the lower right corner

You must be registered for see images attach