Oil filter part number

[95k150050]

So I bought a oil filter for my 95 k1500 and it's thinner than the one I took off. Old one is about 3 to 4 inches in diameter and new one is like 2 inches in diameter. Don't have exact measurements but there noticibly different. When I went to put the new one on it didn't even touch the gasket surface on the filter mount. Does anyone have a part number for the larger filter? AC deldo preferred but any brand is fine

 

[Schurkey]

WHAT ENGINE?

My '88 K1500 5.7 uses a Wix 51036 / NAPA 1036

 

[Oldblue98]

I use K&N HP-3002 on 1998 5.7 I don't use K&N because I think they are any better or worse than anything else, I like the 1 inch welded on nut for easy removal with a wrench or socket

 

[evilunclegrimace]

how is your filter oriented , straight down or on its side. Straight down would be PF25, PF 35 and PF 1218 if I remember correctly. If it lays on its side it is a PF52

 

[89GMCJOHN]

PH5 Fram is also the slightly bigger one
Height 5.172
Inside Diameter 13/16-16 Th'd
Outside Diameter 3.781

PF 35 delco is a longer one too

• 
  
• Outside Diameter (In): 3-3/4 Inch
• Height (In): 5-7/16 Inch
• Bottom Outside Diameter (In): 3-3/4 Inch
• Gasket Or Seal Included: Yes
• Gasket Inside Diameter (In): 3-3/16 Inch
• Gasket Outside Diameter (In): 3-9/16 Inch