Not Low Enough

[zukman31]

I need some help. I lowered my 96 Tahoe with the Belltech kit and flip on the rear. They gave me new leaf spring perch mounts to go on the front side of the rear end. I cut my factory ones off and used there parts. It turned my 7" flip into a 5.5" drop on the rear. I want to go 1 inch lower so the tires fit flush with the lip. Can I just get a 1" block to put in between the leaf spring and rear end to put the rear end up so it sits lower ? If that will work, what brand block do you recommend? I have never used blocks before. I didn`t know if a block would be best or do they make a 1" lowering shackle and what would be easiest to do?
Thanks for the help in advance

 

[MarKist]

this will get your pinion angle back also

You must be registered for see images attach

You must be registered for see images attach

 

[MarKist]

sorry about the pic size, but this is for the rear of the leaf spring.

 

[zukman31]

Thanks. I ordered them and installed them on Thursday. I had to cut the 2nd hole off and round it on the drivers side. It was pushing on the gas line and was mashing it almost shut. It sat the rear down perfect. I took the plastic spacers out of the front and it sat the front down about another inch. I like it better now.