Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You must be registered for see images attach
rockauto shipping fee, this is too much for me, and this is only one fender, the other wasn't in stock
pls help i'm dum
alright, thanks. I've bought good stuff on ebay, but have been skeptical of body panels. I'll look at it.I bought new fenders from carpartswholsale on ebay. They were $126 each. Made in taiwan.
You must be registered for see images attach
These were ok. The front tips of both new fenders were damaged in shipping.
You must be registered for see images attach
The passenger fender didn't match the arc of the door. I had to place a block of wood in the center and carefully bend the fender to better match the door. The drivers side fit very well, but after looking at it, it had 2 small dents, and the rear tip was also bent down.
You must be registered for see images attach
Not a huge deal, and fairly common issues with less expensive fenders. I wouldn't buy these for a nice restoration, but they will work well for this truck.
You must be registered for see images attach
The last pic is with the flare installed. These fenders weren't made for 3/4 tons, so they didn't have the holes drilled - had to mark and drill them. Fairly easy, but takes time.
Went to a local pick and pull a couple of weeks ago and found one in black and in very nice condition, no dents only some light sctatches for $50 and it's real gm metal.
That's why I didn't look, I know there is noneThat doesn't happen much up here in the rust belt.