g00se
Latest activity Postings About
-
-
g00se reacted to someotherguy's post in the thread Towing a 1999 1500 5.7 automatic transmission with
Like.
And just some "gotchas" to cover - if you disconnect the driveshaft at the rear end, take care to leave it in the transmission so you... -
g00se reacted to HotWheelsBurban's post in the thread New Melling water pump install -fan clutch question with Like.
My family used to have an auto parts store, and we also had many 305/350 powered vehicles. So I've had hands on a bunch of the water...
-
g00se replied to the thread New Melling water pump install -fan clutch question.That's a great tip --unfortunately I already mounted it before seeing it --and could not get a wrench on the now hard to reach bolts...
-
g00se reacted to movietvet's post in the thread New Melling water pump install -fan clutch question with Like.
That "3J08D2" number you see is not a GM part #. It is likely a casting number.
-
g00se reacted to HotWheelsBurban's post in the thread New Melling water pump install -fan clutch question with Like.
Severe duty clutch probably works with both plastic and metal fans; my Burb has the plastic fan and the crew cab has the metal one...
-
g00se reacted to HotWheelsBurban's post in the thread New Melling water pump install -fan clutch question with Like.
Be sure to check the back plate bolts on the pump for tightness. I've seen those be loose before, and that's a guaranteed leak.
-
g00se replied to the thread New Melling water pump install -fan clutch question.The fan clutch had GM 3J08D2 printed onto it. No other info on it other than a 'this side down' and a rotational arrow embossed in the...
-
g00se reacted to someotherguy's post in the thread New Melling water pump install -fan clutch question with Like.
Double-check to be sure but I'm thinking 22149569 may have been the original # for your clutch? Punch that into the part # search on...
-
g00se reacted to someotherguy's post in the thread New Melling water pump install -fan clutch question with Like.
I don't think you'll find an OEM GM severe duty fan clutch new, for your application, at this point. Long obsolete so your chances come...
-
g00se reacted to movietvet's post in the thread New Melling water pump install -fan clutch question with Like.
Agree with @someotherguy. If that fan clutch is original and it is off, replace with new. No brainer. Lots of choices at RA with...
-
g00se replied to the thread New Melling water pump install -fan clutch question.Thanks guys! Too bad, I wanted to keep things OEM GM as much as possible. -and the stock clutch doesn't look rebuild friendly for...
-
g00se posted the thread New Melling water pump install -fan clutch question in Engine Performance + Maintenance.Truck temp was rising a bit at stop lights so I pressure checked the cooling system --and the top weep hole on the water pump was...
-
Hey all, On my 93, my inside door handle just flops in the breeze. It operates just fine, but is loose. Any known fix for this or just...
-
Doesn't happen very often but there's a spring on the handle that breaks. I've never tried replacing just the spring as I've had spare...
-
Here on a short vacation. Not able to do much without my tools, but i did what i could. I put in a stock radio since i'll be using that...
-
-
Loading…
-
Loading…
