It made the awful noise shifting from drive to reverse foot on brakeIf I remember correctly, the sun shell is used in r,2 and 4. Cracking is common.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It made the awful noise shifting from drive to reverse foot on brakeIf I remember correctly, the sun shell is used in r,2 and 4. Cracking is common.
Where's the cheapest place to get the upgraded one I'm not going to fix this thing anytime soon but when it warms up I willIt seems like the sun shell to me. I've built a few and seen that a lot.
I was seeing some pictures online and they were showing this but I couldn't see where the snap ring was and they had something they were trying to sell people called the T case saver but it looks like you have to take the tail housing off to grab onto it? I'm thinking that this is what the problem because it makes the noise and then I put the truck in park and then back in reverse and it always goes but when it's making the noise it doesn't go into reverse I really got to figure something out because both of my trucks are all screwed up and I started a new job and I cannot afford to have a dead vehicleSounds like the snap ring that holds the output shaft in the t-case let go.
Pull the driveshaft and see if you can pull the output shaft out . It shouldn't have much play if the snap ring is still gpod.