Blahblahblar
Newbie
This was just a test cut of 12 guage steel to help with finding the shape btw
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
So it looks like I have the right length and angles now. It has around 1/2" clearance from the trans cross member, even with the arm jacked all the way to the bump stop still had good clearance. I think the next step would be to decide what metal/grade to use and definitely put some extra material around the hex shapes.
You must be registered for see images attach