Gmt400 parts

[xAFNYx]

Good afternoon all, I am seeking the elusive driver side battery tray for my 1994 Silverado....Any information would be great...

I have one actually. Unless the 94 is different than the 98

 

[1994Oldblue]

they say the one for a 1994 ran from 88 to 95, so Im thinking there is a change of some kind.....But Im interested , anyway to get a photo and how much$$ richard dot e dot manning at Boeing dot com, thank you, I will go research

 

[xAFNYx]

they say the one for a 1994 ran from 88 to 95, so Im thinking there is a change of some kind.....But Im interested , anyway to get a photo and how much$$ richard dot e dot manning at Boeing dot com, thank you, I will go research

Sure thing, I'll grab a pic of it as soon as I get my truck back from the shop

 

[CumminsBronco]

Good evening. I am looking for a set of GMC3500 door emblems that work with the side molding strip. The part number was 15551241 when they were still available at the dealer. They are now discontinued. Thanks.

 

[xAFNYx]

they say the one for a 1994 ran from 88 to 95, so Im thinking there is a change of some kind.....But Im interested , anyway to get a photo and how much$$ richard dot e dot manning at Boeing dot com, thank you, I will go research

I just got the truck back yesterday, I'll grab a pic of the tray tomorrow.

 

[EmeraldCityGuy]

Might you have a Cruise Control Module for a 1992 K2500? I believe the part number is CM4019 or 25140076 or 250744400B. Ship to Maple Valley, WA 98038

Thanks,
Rich

 

[FlyByWire]

Looking for the upper and lower steering column cover for a 98.

 

[xAFNYx]

they say the one for a 1994 ran from 88 to 95, so Im thinking there is a change of some kind.....But Im interested , anyway to get a photo and how much$$ richard dot e dot manning at Boeing dot com, thank you, I will go research

 

[CumminsBronco]

Would you have the steering column cover/trim pcs for a 97 manual trans truck? I put in a manual transmission and would like to replace the 2 pc cover that was used with the column shifter of the automatic.
edit....im guessing 96 and up are the same.

 

[kennythewelder]

Would you have the steering column cover/trim pcs for a 97 manual trans truck? I put in a manual transmission and would like to replace the 2 pc cover that was used with the column shifter of the automatic.
edit....im guessing 96 and up are the same.

I built a custom floor shifter for my 97 about a year and a half ago. So, like you, I removed the column shifter. The manual column cover, is the same as the automatic cover. Only difference is, the manual has a plastic cover that goes over the hole where the column shift would be. All it is, is a little plastic cover about 2 inches wide by 3 inches tall, and it fits in the hole where the auto trans shifter is. I removed my auto shifter boot, and glued in a flat rubber gasket. The original plastic cover has groves just like what's under where the ing key goes.

You must be registered for see images attach