I have one actually. Unless the 94 is different than the 98Good afternoon all, I am seeking the elusive driver side battery tray for my 1994 Silverado....Any information would be great...
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I have one actually. Unless the 94 is different than the 98Good afternoon all, I am seeking the elusive driver side battery tray for my 1994 Silverado....Any information would be great...
Sure thing, I'll grab a pic of it as soon as I get my truck back from the shopthey say the one for a 1994 ran from 88 to 95, so Im thinking there is a change of some kind.....But Im interested , anyway to get a photo and how much$$ richard dot e dot manning at Boeing dot com, thank you, I will go research
I just got the truck back yesterday, I'll grab a pic of the tray tomorrow.they say the one for a 1994 ran from 88 to 95, so Im thinking there is a change of some kind.....But Im interested , anyway to get a photo and how much$$ richard dot e dot manning at Boeing dot com, thank you, I will go research
they say the one for a 1994 ran from 88 to 95, so Im thinking there is a change of some kind.....But Im interested , anyway to get a photo and how much$$ richard dot e dot manning at Boeing dot com, thank you, I will go research
I built a custom floor shifter for my 97 about a year and a half ago. So, like you, I removed the column shifter. The manual column cover, is the same as the automatic cover. Only difference is, the manual has a plastic cover that goes over the hole where the column shift would be. All it is, is a little plastic cover about 2 inches wide by 3 inches tall, and it fits in the hole where the auto trans shifter is. I removed my auto shifter boot, and glued in a flat rubber gasket. The original plastic cover has groves just like what's under where the ing key goes.Would you have the steering column cover/trim pcs for a 97 manual trans truck? I put in a manual transmission and would like to replace the 2 pc cover that was used with the column shifter of the automatic.
edit....im guessing 96 and up are the same.