Fuse panel,no brake lights and seats..1998 ECSB 2500

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

joedee

OBS Enthusiast
Joined
Feb 28, 2015
Messages
94
Reaction score
3
Location
Woodstock,Ky
I have owned the truck since 1998 bought new , As a truck for my shop and landscape service and was serviced by employees I suspect they lost the original fuse panel door with diagram and replaced it with an older one . I finally searched google and found the correct one. I have no blown fuses. I replaced all fuses with new ones before posting this question. Also my cig lighter aux plugs and power lumbar have stopped working.


My main concern is I have no brake lights or 4 way flashers, the flasher switch acts odd . I suspect the flasher switch or brake light switch.. is that a good place to start ?.I checked the frame grounds looked fine ..Where should I start to find the power issue on these seats and aux plugs ?
 
Last edited:
Top