Front bags parts, which ones to buy and is there a difference?

[jmig]

I'm ready to buy cups, bags and shock mounts for the front of my truck. The plan is to lay rockers on 22's. I will be getting some new control arms, probably the ones from MMW. Going with RE7's bags but have found different cups while seaching the web. Is there a certain height I should be looking at and what are the differences? The price ranges from $60 up to $100. I just want to make sure before making the jump into air ride!

 

[smurfcivic]

I'm running stock upper and lowers with 2 in spindles. I went with thorbeck bros cups and dominator 2600 bags.

 

[Devs93]

If u dont get mmws ekstestive has a nice front kit for a 100 bucks also re7 went up in price and are running a thinner rubber thats been tearing from what i have been reading lately. Im gonna run air lift on mine

Sent from my VS920 4G using Tapatalk 2

 

[jmig]

Thanks guys, I want to save some money on parts but don't want to sacrifice quaility. For instance on the bag cups, I found a set for $59.99 plus shipping. Dev did you get the 3 link off of John?

 

[DRAGGIN95]

For height I lay on my 265/35/22's with a 2 7/8's tall upper cup.

 

[jmig]

For height I lay on my 265/35/22's with a 2 7/8's tall upper cup.

Did you have to cut yours down and is this typical on any of the cups you buy? I did see a distributor offer different heights.
Also is there any pros and cons to single or dual valves bags?

 

[Devs93]

Yea
60 is ok u will still need relocaters for ur shocks to though

You must be registered for see images attach

Thats erics with the ekstensive kit and modded stock arms. Will lay a 30in tire
Sent from my VS920 4G using Tapatalk 2

 

[jmig]

I found these at the customconnectionllc.com for $59.99

You must be registered for see images attach

and this fabricators kit for $49.99

You must be registered for see images attach

 

[dagen_1]

the top pic is the one i would go with... if you don't take advantage of Ekstensive's free shipping today... i bought their cup/shock relocator kit deven mentioned for $90. some vendors sell the shock relocators alone for $40.

i've been looking at the customconnectionllc website for the last couple weeks, i think their going to get the benefits of my tax refund check.

 

[dagen_1]

Yea
60 is ok u will still need relocaters for ur shocks to though

You must be registered for see images attach

Thats erics with the ekstensive kit and modded stock arms. Will lay a 30in tire
Sent from my VS920 4G using Tapatalk 2

dang that rotor looks up crammed up in the fender like that...