Denali_high
Newbie
Ok so here my issue... I bought this truck about 6 months ago and did extensive work to it including a stock motor swap..i drove it home from my friend's house and the driver side exhaust broke off at the down pipe. So I got it home and started to do some bolt ons that would make a custom tune worth while.
I installed longtune headers and replaces the upstream 02s
Egr block offs from route66mods
Ebay air intake,silencer mod,throttle plate mod
Pulled and painted stock valve covers. While doing this i had to remove the alt bracket and loosen the AC and power steering bracket.
Accel high temp plug wires
Clutch fan delete for E fans
After i coated the longtubes I installed them and began to put everything back together.
Long story short.. it refuses to fire. Cranks but not starting at all.
Its getting fuel
Has new cap and rotor..new ign module..new crank and cam sensor.
Me and my friend did some electrical trouble shooting and everything checks out fine but there is no pulse from the coil.
Everything worked just fine till I started to do these mods.
A little history behind it all...
Bought the truck with no motor or wheels and needed a rear end swap. Got all that finished and come to find out the fuel pump relay was not getting a good connection (after we found out the fuel pump the previous owner installed was the wrong one)
Codes that showed up was the crank and cam sensor..but it fired everytime..while it was down I figured i would replace them all.. well now it keeps popping up the crank sensor even after clearing it..this is the 3rd sensor I've put on it so frankly its not the sensor itself.
We spliced the whole wire loom the other day and there is not a single wire. The crank sensor gets 12v or so w the key off..but as soon as the keys on it drops volts drastically. Is this normal?
Its sat for so long and there is NOTHING I can find wrong...all plugs are plugged in checked the fuses probably 2 dozen time's. This is starting to depress me like no other!
I have alot more to do to it but this is holding me back so far its not funny!!
Can someone please chime in? There hasnt been one person whos been a help that I've asked yet..
So I will use this as my first post on the forum. If this is the wrong place to ask then I guess I should find another forum. This was the closest topic I could find.
SOMEONE PLEASE HELP i don't know what to do at all
I installed longtune headers and replaces the upstream 02s
Egr block offs from route66mods
Ebay air intake,silencer mod,throttle plate mod
Pulled and painted stock valve covers. While doing this i had to remove the alt bracket and loosen the AC and power steering bracket.
Accel high temp plug wires
Clutch fan delete for E fans
After i coated the longtubes I installed them and began to put everything back together.
Long story short.. it refuses to fire. Cranks but not starting at all.
Its getting fuel
Has new cap and rotor..new ign module..new crank and cam sensor.
Me and my friend did some electrical trouble shooting and everything checks out fine but there is no pulse from the coil.
Everything worked just fine till I started to do these mods.
A little history behind it all...
Bought the truck with no motor or wheels and needed a rear end swap. Got all that finished and come to find out the fuel pump relay was not getting a good connection (after we found out the fuel pump the previous owner installed was the wrong one)
Codes that showed up was the crank and cam sensor..but it fired everytime..while it was down I figured i would replace them all.. well now it keeps popping up the crank sensor even after clearing it..this is the 3rd sensor I've put on it so frankly its not the sensor itself.
We spliced the whole wire loom the other day and there is not a single wire. The crank sensor gets 12v or so w the key off..but as soon as the keys on it drops volts drastically. Is this normal?
Its sat for so long and there is NOTHING I can find wrong...all plugs are plugged in checked the fuses probably 2 dozen time's. This is starting to depress me like no other!
I have alot more to do to it but this is holding me back so far its not funny!!
Can someone please chime in? There hasnt been one person whos been a help that I've asked yet..
So I will use this as my first post on the forum. If this is the wrong place to ask then I guess I should find another forum. This was the closest topic I could find.
SOMEONE PLEASE HELP i don't know what to do at all
Last edited: