Edelbrock Small Block Chevy T.B.I Performer Power Package

[uhhhpooo]

I am curious on what y’all think about this package, doesn’t seem that bad for the price song the intake alone is $450, and it won’t need a chip or anything since it’s not heads etc, just seems something simple. https://www.jegs.com/i/Edelbrock/350/3704PK/10002/-1

 

[Schurkey]

I'd think the "chip" would be more-required with the cam than with the heads. OTOH, the cam is really mild. Be careful.

If I read the Jeg's page right, this intake manifold would also use the stock TBI intake gaskets.

Seems like a huge amount of money for an intake manifold and a flat-tappet cam/lifter set.

 

[uhhhpooo]

I'd think the "chip" would be more-required with the cam than with the heads. OTOH, the cam is really mild. Be careful.

If I read the Jeg's page right, this intake manifold would also use the stock TBI intake gaskets.

Seems like a huge amount of money for an intake manifold and a flat-tappet cam/lifter set.

I notice the cam was mild and was confused on why it said not chip required, i am sure there is a better setup for less money was just wondering, have heard decent things about the intake and it’s $450 so i didn’t think it was to expensive, but prb could get a cam and lifters for a cheaper price