It has been done for a long time, I just dont remember. Teflon cant hurt anything though. A king nipple is tapered. It is NPT threads. I think it's 3/4 but not 100 percent on that
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thanks for the help kenny, I was wondering the thread type. I will update thread when I get everything fixed up. Gonna put a brass pipe nipple with new heater hose. May put high temp rtv on top threads. Not sure.It has been done for a long time, I just dont remember. Teflon cant hurt anything though. A king nipple is tapered. It is NPT threads. I think it's 3/4 but not 100 percent on thatYou must be registered for see images attach
After I fix the fitting. I only need to add coolant to the reservoir yes?
Sent from my Pixel XL using Tapatalk
So I should add a little to the radiator cap?I'd do a complete system burp just to make sure coolant gets up and through the heater core, as the pipes you just repaired are a system high point.
So I should add a little to the radiator cap?
Sent from my Pixel XL using Tapatalk