Colder air for the 6.5

[Claytorr]

The rear AC line I needed was discontinued so I had to buy one from a gasser. I installed the S&B filter without the box. Seems like the truck is getting hotter air and looking for ideas to get more cold air in. Snorkel maybe?

You must be registered for see images attach

 

[99xcss4]

I do not know about a snorkel setup but this is most likely the best option https://sbfilters.com/products/chev...0-intake-kit-75-5045?variant=44752388325669it is not cheap if you want an aftermarket intake if you want a stock one I would go with the 97+ one it is way better then one found on the 96 and older

 

[99xcss4]

this is the factory 97+ air box I do not know the going rate for them but this one is a little spendy I it was an option on 96 and older it is known as the k47 air box and in 97 it became standard https://www.ebay.com/itm/134617641031?hash=item1f57d63047:g:YEoAAOSwbrpkjnwi

 

[Claytorr]

I do not know about a snorkel setup but this is most likely the best option https://sbfilters.com/products/chev...0-intake-kit-75-5045?variant=44752388325669it is not cheap if you want an aftermarket intake if you want a stock one I would go with the 97+ one it is way better then one found on the 96 and older

Thanks I bought the S&B I just Can fit the box around the filter. The AC line gets in the way. I am trying to figure out if I should cut the S&B box to fit around the AC pipe.

 

[df2x4]

I would just get the correct AC line so everything clears. You could check car-part.com or row52.com to find a truck near you in a salvage yard that might have one, or have a shop make you a custom line. If you Google "Custom AC lines" there are websites that will make you something based on whatever measurements you need. Coldhose.com for example...

https://coldhose.com/products/build-a-custom-ac-hose?variant=37921983004832