Body Mount Replacement Questions

[TAF2003]

cool thanks for the prompt reply. My driver side rear bushing is destroyed and the bolt head is gone, so need to figure out a way to remove it.

be tempting to try and fill an oversize nut with JB Weld and slip it on the shank to give you something to grab onto with a socket.

 

[RayHardesty187]

I ran into this on my 98 I was low on money so I went 2 wal mart and got the black and decker easy out kit it come with 5 I drilled a hole in the center and grabbed the 3rd from the biggest and went at it 3 hrs later and a can of pb blaster I had my bolt out.