Rotted body mount repair question!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.


OEM Baby!
Supporting Member
Jul 17, 2020
Reaction score
The Hub
Allright guys I finally got around to this job. Made some hardware to allow for oem fit.

I took several measurements with a piece of twine taped center on each body mount hole on the bottom of the cab and I got back the measurements of 47-3/4” from front mount to back mount.

Then 52” from side to side cab mounts.

Is anyone able to verify these measurements off their rig or any schematics or project frames. You would make my day :)

Thanks for all the help, todays the welding day
If you don’t trust your own measurements, a layout stick NEVER lies.