-
-
Ccato replied to the thread WB O2 and ECM values different.Base timing is adjusted and scalar corrected. You guys answered my question with total advance, i.e. 10+42 = 52. The VE tables are... -
-
Ccato replied to the thread WB O2 and ECM values different.First order of business is to get my initial timing set to 10. There has been no knock with the current setup, but I have no problem...
-
Ccato replied to the thread WB O2 and ECM values different.Posting this chart for anyone who has trouble setting up the AEM X WB like I did. Initially I used the setup in EBL instructions with...
-
-
Ccato replied to the thread WB O2 and ECM values different.@Scooterwrench here you go. If you want to see others just let me know, but these are the only ones I’ve touched. I’m aware SA initial...
-
-
Ccato replied to the thread VE table Low Values.I learned a valuable lesson, do not assume something is good because it is new. Electronics I know are hit and miss, but vacuum hose was...
-
-
Ccato replied to the thread VE table Low Values.I have the latest Tuner pro and have used the interpolate Y with smoothing. There was a post by @L31MaxExpress going over VE learns I...
-
Ccato replied to the thread WB O2 and ECM values different.That’s exactly what they are.
-
I am here again trying to get my tune dialed in with EBL. 383 Stroker/700r4, 212/222 duration, SPR performance throttle body with flow...
-
-
I am running 8.5 - 18 and as far as I can see when driving it's as close as I can expect without setting up a video to watch the gauge...
-
Ccato replied to the thread WB O2 and ECM values different.EBL just has OVSPD as far as I can see, but it's a scalar. I did make an adjustment there, but I understand they are more like a safety...
-
Ccato replied to the thread WB O2 and ECM values different.The O2 is reading much better after adjusting voltage and AFR. Still not 100%, but within 0.3 at higher speeds. Unfortunately KPA has...
-
Ccato replied to the thread WB O2 and ECM values different.What are the values you’re running in your channel? I checked the manual and adjusted 0-4.5v and 8.5-18 AFR. However, mine reads closest...
-
Ccato replied to the thread WB O2 and ECM values different.If I remember correctly you used the 3000 bin for VE tables? I remember some of your posts talking about tuning the NB O2 and having...
-
Ccato replied to the thread WB O2 and ECM values different.That is exactly how mine is set. Just tested it for 4.5v. I need to talk to customer support again and clarify the calibration.
-
Ccato replied to the thread WB O2 and ECM values different.I’ve got a ways to go for mine to be that smooth, though it doesn’t hunt or surge. I’ve been fighting rich conditions and chasing my...
-
-
Loading…
-
Loading…
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder. -
Old77Administrator
Members online
- prfixer
- CrustyJunker
- HotWheelsBurban
- DieselTech
- ddochs
- fancyTBI
- gakcsin
- kennythewelder
- greeneyes
- llorrachome27
- kfelgnar
- J_Belchamber
- AdamN
- Carlaisle
- Neal_95_400
- Crashout
- Trio
- FNolen13
- chevyshaw
- jsillystring
- rebelyell
- hsx_punisher
- 99xcss4
- roguemechanic
- slow_c1500
- caw_86
- Hammersmith
- lo2doorho
- Skii
- Zimmerly
- trabbot2
- EricM9104
- pops84c10
- offroadtahoe
- Ngrou01
- 1998Dave
- AMightyTank420
- Sean Buick 76
- 4x4burbs
- K150094
- juniorkusch
- jtc2389
- rebelfab
- tootallchevy94
- Old77
- Moparmat2000
- Shortish66
- skylark
- Pos94obs
- L31MaxExpress