A life of Sin

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

-sin-

Honor the Fallen
Joined
Sep 24, 2012
Messages
880
Reaction score
37
Location
Tucson, AZ
*UPDATED - Feb 02, 2013*

1996 Chevy K1500 Silverado, 350, Auto, 4wd, Ecsb

Wants:


HID low beams - done!
HID high beams
4 High Mod - done!
Steel Bumpers w/ winch mount
6"-7" HID fog lights or LED bar
BL or Susp Lift 3"-4"
Rebuild Trans and Engine
35" Tires
Flush Tool Box
Headache Rack/Light Bar (possible roof rack)
Canvas over Caged Bed
High Lift Jack mount - done!
On Board Air

and whatever else to make it a competent Overland Expedition Vehicle

==========================================================================================

Photoshopped guide to how I want the front painted
You must be registered for see images attach
 
Last edited:

-sin-

Honor the Fallen
Joined
Sep 24, 2012
Messages
880
Reaction score
37
Location
Tucson, AZ
when I first got it:
You must be registered for see images attach



first thing I did was scrap the nerf bars and front air dam:
You must be registered for see images attach



it came with a K&N intake:
You must be registered for see images attach



and upon further inspection it had cross-drilled and slotted rotors - SCORE!:
You must be registered for see images attach



Flowmaster 10 series race mufflers / (it's VERY loud):
You must be registered for see images attach



Led Guages
You must be registered for see images attach



Led Interior
You must be registered for see images attach
 

-sin-

Honor the Fallen
Joined
Sep 24, 2012
Messages
880
Reaction score
37
Location
Tucson, AZ
I had this overhead console left over from my other truck, so I modified it to fit!
Unfortunately the console is not deep enough to use the directional lights.
I added in the stock button holes (2) License LEDs that are threaded and tapped into the dome light wiring..
You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach



4-High Lighting / 5K - 55w HIDs from DDM Tuning
You must be registered for see images attach


You must be registered for see images attach



Westin Bull Bar, cut and welded to existing bumper
You must be registered for see images attach
 

-sin-

Honor the Fallen
Joined
Sep 24, 2012
Messages
880
Reaction score
37
Location
Tucson, AZ
Removed the bodyside moldings yesterday and sanded the rockers to prep for bed liner to be applied soon!

You must be registered for see images attach


You must be registered for see images attach
 
Top