lickmyburger89
Newbie
I've been chasing this issue for a little while, the truck will start and die as soon as it turns over. stays running if you give her some throttle but will die as soon as she tries to idle.sounds fine when you rev with no load. misses and runs like crap taking off. unplug the map,she runs beautifully. running rich that way but no issues and has 18in of vacuum at the map port. if i plug in the map while running she'll die right away and it looks almost as if the injectors get cut off right before she dies . I've tested the injectors, coolant temp sensor, tps, map, iac, egr solenoid,egr and passages, o2, fuel relay, and oil pressure switch which all test out fine. fuel pump was weak so i replaced it and the filter, and reuilt the throttle body because of a leaky regulator. replaced the distributor because of a failed coil pickup and replaced plugs and wires too. Is there anything i could have overlooked before i put blame onto the ecm?