EDGECRUSHER
Newbie
- Joined
- Jul 14, 2011
- Messages
- 40
- Reaction score
- 3
lol, looks like I missed some good stuff? I didn't mean for this to turn into a debate about TBI vs. MPFI.
Regardless, I think if your buying an LS you're either going to get the harness and computer in the deal or find one later. Reverse engineering the LS while maybe being a challenge in and of itself is not what I'm after. However, I think it's funny how some people get so wound up when Megasquirt is mentioned in these swaps.
My current situation:
I added a product called Seafoam to my gas after reading some forums that sparked my curiosity. Almost immediately i started noticing coolant leaking and narrowed it down to a bad passenger side head gasket which I attribute to the Seafoam in an old motor which will prolly start a new arguement lol. Any ways, the coolant isn't getting into the oil or the cylinders... yet, and it's not my DD. So I got some time to finger out what I'm gonna do. I was going to just rebuild but I'm finding it's not going to cost that much more to do a swap. As long as I'm at it the whole front end of the truck will be rebuilt. So I got time to do it right. Maybe not all the money I want, but you know...
So it's sounding like whether I go with a 5.3 or a 6.0, the process of mating them up to my current tranny is the same. I will need to set up the TCC with a bowtie TV cable kit. However, I'm still not certain of the difference in length between the 6.0 and 5.3 and whether the 6.0 needs the trans adapter like the 5.3. Once I figure out how to mate the two together I can see where the motor is gonna sit and fab mounts for that.
It'd be real nice to find a place where someone doing a swap with the 6.0 to 700r4 listed all the extra parts involved and their numbers. I found one that said he would but then started into a downward spiral of rants back and forth about TBI and never finished. Their a dime a dozen, the hard part is filtering the relevant info out. Mechanics aren't good writers usually.
Regardless, I think if your buying an LS you're either going to get the harness and computer in the deal or find one later. Reverse engineering the LS while maybe being a challenge in and of itself is not what I'm after. However, I think it's funny how some people get so wound up when Megasquirt is mentioned in these swaps.
My current situation:
I added a product called Seafoam to my gas after reading some forums that sparked my curiosity. Almost immediately i started noticing coolant leaking and narrowed it down to a bad passenger side head gasket which I attribute to the Seafoam in an old motor which will prolly start a new arguement lol. Any ways, the coolant isn't getting into the oil or the cylinders... yet, and it's not my DD. So I got some time to finger out what I'm gonna do. I was going to just rebuild but I'm finding it's not going to cost that much more to do a swap. As long as I'm at it the whole front end of the truck will be rebuilt. So I got time to do it right. Maybe not all the money I want, but you know...
So it's sounding like whether I go with a 5.3 or a 6.0, the process of mating them up to my current tranny is the same. I will need to set up the TCC with a bowtie TV cable kit. However, I'm still not certain of the difference in length between the 6.0 and 5.3 and whether the 6.0 needs the trans adapter like the 5.3. Once I figure out how to mate the two together I can see where the motor is gonna sit and fab mounts for that.
It'd be real nice to find a place where someone doing a swap with the 6.0 to 700r4 listed all the extra parts involved and their numbers. I found one that said he would but then started into a downward spiral of rants back and forth about TBI and never finished. Their a dime a dozen, the hard part is filtering the relevant info out. Mechanics aren't good writers usually.