5lm60 to THt400 swap questions

[98_k1500]

You can do it if you run solid mount engine mounts, but you can't run rubber on one end and solid on the other.

 

[highperf4x4]

Nah. I'll figure out the cross member and use the rubber mounts.

Sent from my SCH-I545 using Tapatalk

 

[highperf4x4]

Something ................... is missing.

You must be registered for see images attach

 

[TylerZ281500]

ahhh the horror i had to put a th350 back together yesterday by someone who took it apart and scattered everything......ahhhhhh the terror!

 

[highperf4x4]

LOL that would suck. Fortunately I am paying a wizard to build this one for me. I had to take the case to another dude to have it welded though. It had a couple of cracks around the bolt holes.

Sent from my SCH-I545 using Tapatalk

 

[highperf4x4]

I'm getting all tingly inside.

You must be registered for see images attach

Sent from my SCH-I545 using Tapatalk

 

[TylerZ281500]

liftin the thing at the same time?

 

[highperf4x4]

Yup, tranny swap, lift kit, gears. I had only raised it 2 inches to get the 33s on it. I'm going up another 6" and I'll start shopping around for some 35" boggers.

 

[highperf4x4]

Ok the front is out for the lift kit installation. I'm dropping it off at the shop for some 4.56 gears. Last chance to talk me out of it!

You must be registered for see images attach

 

[highperf4x4]

How about them apples?

You must be registered for see images attach

Sent from my SCH-I545 using Tapatalk