hi all,
i have a 1999 k1500 suburban, purchased in the fall. truck has 212k miles 5.7 with the 4l60e. last week the rear end blow up, im thinking it was rebuilt and not so well. the carrier broke into quite afew pieces and the planetary gears where broken aswell. i found a thin bolt about 1.5"long stuck to the magnet on the cover. it was under a build up of sliver looking paste, just giving a little backlight on my findings and what happened. so w.e. with all that i got a good rear and tossed it into the truck just to see what else may be wrong and im almost 100% i need to rebuild the trans. reverse works fine, 1st works, 2nd work, 3rd aswell but when i select drive it just sits still and sounds like something is gonna break. but when i manually shiff everything is good even od, but when i stop i need to manually shift again. any help would be great ty in advance.
i have a 1999 k1500 suburban, purchased in the fall. truck has 212k miles 5.7 with the 4l60e. last week the rear end blow up, im thinking it was rebuilt and not so well. the carrier broke into quite afew pieces and the planetary gears where broken aswell. i found a thin bolt about 1.5"long stuck to the magnet on the cover. it was under a build up of sliver looking paste, just giving a little backlight on my findings and what happened. so w.e. with all that i got a good rear and tossed it into the truck just to see what else may be wrong and im almost 100% i need to rebuild the trans. reverse works fine, 1st works, 2nd work, 3rd aswell but when i select drive it just sits still and sounds like something is gonna break. but when i manually shiff everything is good even od, but when i stop i need to manually shift again. any help would be great ty in advance.