20nmichalski
Newbie
I’m looking to swap my old tired 350 for a 383 from blueprint. I'm curious as to what I would need to do to make sure the drive train could handle the swap. It has 60e. I was wondering if I should also swap the tranny for the 80e and if I should swap the rear end and if so what would you recommend. I'm also curious as to what headers I should use, I would like some ****** headers but I don't know what would work with the motor and will fit at the same time. If there is anything else I should worry about with the swap too I would love to know.
I also heard of a guy that did this swap and used a built a Monster Transmissions 4l60e that was built. Any thoughts on that?
I also heard of a guy that did this swap and used a built a Monster Transmissions 4l60e that was built. Any thoughts on that?
Last edited: